Aquasystems nws tecnicians

On June 11, 2019 we gave our first training for technicians from a distributor.

The technicians first received a short general and theoretical training about our products. Then we discussed the installation of our floating surface aerator AER-AS.
The various installation options, including mooring cables, guiding tubes and hinged arms, were explained in detail.

Important points of attention were mentioned for each of these installation methods, which aim at a smooth and correct installation. Moreover, we also provided explanations about the different options of the AER-AS, including when to use which option.

In the afternoon there was also a practical part where our technicians demonstrated the assembly and disassembly of an AER-AS.
The aerators were also placed in our test basin, electrically connected and started up.

The AER-SB submersible aerator was also dismantled, reassembled and finally placed in the basin for testing.

After the training, we were able to issue our first certificates.

For the future, we intend to offer this training to our partners, so that they can guarantee a good and smooth assembly to their end customers.



aquaturbo brigi hitec 1

BRIGI HI-TEC is our main supplier for polyester components.

We use polyester for our cover for our entire range of floating aerators type AER-AS ( 1.1 kw up to 200kw) and the cover for our ADMC unts ( type 150-300-800-1500).

Polyester is a light and strong material and this is the reason why we use it for both applications.

Brigi hi-tec was founded around 1970 as a start-up of 2 persons. In the beginning the Company made polyester mobilhomes.

Because Jean-Pierre Borrele was a good surfer, he used his knowledge to manufacture polyester to build his own surf board and sold many of them.

One of his most special designs is the manufacturing of a large arch for the stage of the well-known festival ‘Tomorrowland’.

Jean-Pierre Borrele has the age to go on retiremenet but he is so motivated that he still wants to continue with his passion of manufacturing polyester parts.

in July we installed a cover for a floating aerator 90 kw at a customer in France

Here under you can see some photos of the assembling, handling and installation of the cover.


aquaturbo brigi hitec 2   aquaturbo brigi hitec 3